Tell me about the V speeds in a Seneca

Tell me about the V speeds in a Seneca

V speed in a Seneca:

Vr = 77kts

Vx = 76kts

Vy = 89kts

Vyse = 89kts

Vmca = 68kts

Vne = 195kts

Vno = 163kts

Va = 121kts

If you pitched up in the Seneca, what would happen to the blade angle?

If you pitched up in the Seneca, what would happen to the blade angle?

If you pitch up in a Seneca the speed IAS will decrease, because of the constant speed drive (in the propeller hub).

The propellers want to maintain the original RPM. Therefore the blades will go to a more fine blade setting.

How do the pneumatic de-icing devices on the Seneca work?

How do the pneumatic de-icing devices on the Seneca work?

We are missing the answer.

You’ve been flying the Seneca, does it have a critical engine?

You’ve been flying the Seneca, does it have a critical engine?

Yes, the left engine is the critical engine because the propellers rotate clockwise.

What is the Engine Failure After Take off drill on your previous aircraft?

What is the Engine Failure After Take off drill on your previous aircraft?

We are missing the answer.

What is the maximum crosswind limit on a Seneca?

What is the maximum crosswind limit on a Seneca?

17KTS

Does the Seneca have a carb heat system?

Does the Seneca have a carb heat system?

No, Seneca has a fuel injection system therefore it does not have a carburator.

What's the purpose of the mirror looking at the nose-wheel on a Seneca?

What's the purpose of the mirror looking at the nose-wheel on a Seneca?

We are missing the answer.

When you feather the engine on the Seneca, do you have to feather before a certain RPM?

When you feather the engine on the Seneca, do you have to feather before a certain RPM?

Yes, feathering locks engage at 800 RPM on the Seneca.

We feather to stop windmilling and reduce drag.

Do you get carb icing in the Seneca?

Do you get carb icing in the Seneca?

No, Seneca has a fuel injection system which doesn’t suffer from vapour icing.

You have reached the end of the test!Share LinkFinish